The cable pinout on the Simplified POE camera is different from the stanrard LAN cable because only four out of the eight cables within the LAN cable are actually used.
If the cable on the camera is damaged and needs to be replaced, please use the diagram above to model how to reinstall the cables into the pin positions.
Pins 1 and 6 are power, pin 1 is negative and pin 6 is positive. Pins 2 and 3 transmit data to and from the camera.
**Please do not use this diagram to create a pinout for a separate power source for the Simplified POE cameras. The cameras use a proprietary data communication protocol, therefore the only way to power on the camera is to directly connect it to one of the back ports on the the Simplified POE NVR.