Clik here to view.
Video Playback on the 8100 and 8110 series DVR's
Right click the mouse hooked up to the DVR and you will be prompted to log in to the DVR. The default password is 666666. If already logged in move on to the next step. After loging in you right...
View ArticleClik here to view.
Setting Motion recording on the 8100 and 8110 series DVR's
Setting the 8000 and 8100 series DVR's to record is relatvely straight forward. After having turned on the DVR, if the hard-drive is unformatted or you have just installed your own, you will be...
View ArticleClik here to view.
Default Admin Passwords for Zmodo DVR Units
The following is a comprehensive list of all default DVR passwords for current and previous Zmodo DVR models: _________________________________________________________________________________ SBN...
View ArticleClik here to view.
How do I back up video on my SCN4/8 or SEN6 DVR?
This article will explain how to back up video that was previously recorded on the SCN series DVR. Note: Navigating the DVR's menu system is most easily accomplished using the mouse that came with the...
View ArticleCan I use Satellite Internet to see my DVR? --No.
The short answer is no. In addition Zmodo does not support or assist in the setup of a DVR to be viewed over satellite internet. No matter what your source of internet is, you will always be able to...
View ArticleClik here to view.
How do I playback video on my SCN4/8 OR SEN6 DVR?
This article will explain how to play back video that was previously recorded on the SCN series DVR. Note: Navigating the DVR's menu system is most easily accomplished using the mouse that came with...
View ArticleClik here to view.
How do I set up continuous recording on the SCN4/8 OR SEN6?
This article will show you how to set your SCN or SEN model DVR to record continuously. After having connected a monitor and your cameras to the DVR, and with it powered on, right click the mouse. You...
View ArticleClik here to view.
How do I set up Motion Recording on the SCN4/8 or SEN6?
This article will show you how to set your SCN model DVR to record on motion only Note: Navigating the DVR's menu system is most easily accomplished using the mouse that came with the DVR. After having...
View ArticleClik here to view.
How do I back up video on my SCN4/8 or SEN6 DVR?
This article will explain how to back up video that was previously recorded on the SCN series DVR. Note: Navigating the DVR's menu system is most easily accomplished using the mouse that came with the...
View ArticleWhich Zmodo DVRs are Compatible with Macintosh OS?
The following is a list of all current Zmodo DVRs as of December 2013 and whether they are compatible with Mac OS: ZMD-DH-SEN6 (Limited Functionality on Mac) From a Mac, Safari lets you view all...
View ArticleThe Video Feed From My Cameras Has Scrolling Lines
Lines scrolling through your camera images are a sign of signal degradation and are typically caused by one of two things. The most common cause of lines scrolling through your camera image is signal...
View ArticleRecording Resolutions and Quality
Recording Resolutions and Quality When it comes to overall quality of an analog security camera system, there are a few different variables that you want to look at. Recording resolution, frame rate,...
View ArticleClik here to view.
How Do I Format The HDD On A DVR-H9104, H9108, or H9106?
You may need to format an HDD in your DVR if the recording is no longer working properly or you have installed a new HDD. This guide was written using a DVR-H9104, but the steps should be identicle...
View ArticleClik here to view.
How Do I Format The HDD On A DVR-H8114, H8118, or H8116?
You may need to format an HDD in your DVR if the recording is no longer working properly or you have installed a new HDD. This guide was written using a DVR-H8114, but the steps will be identicle on...
View ArticleClik here to view.
How Do I Format the HDD On A SCN4, SCN8, and SEN6?
The SCN4, SCN8, and SEN6 will automatically format an HDD on boot up if it doesn't detect a format. While this guide uses pictures from an SCN4, it will be the exact same for the SCN8 and SEN6. It...
View ArticleHow Do I Hook Up a Zmodo DVR ?
Basic Hook Up Instructions The video below will show you how to hookup your cameras to your DVR, your DVR to your monitor, and the power supplies to your DVR and cameras
View ArticlePPPoE (Point-to-Point Protocol over Ethernet)
PPPoE (Point-to-Point Protocol over Ethernet) Product:Any DVR, NVR, or IP cameras that require port forwarding. OverviewShort summary on PPPoE internet connections and how to configure them to work...
View ArticleInteractive Network Tutorial
Interactive Network Tutorial To access our new interactive networking tutorial, please visit the following link: Here
View ArticleCan’t Login With Internet Explorer on ZMD-DD-SAN4/SAN8 and ZMD-DD-SBN4/SBN8
If you are able to load the web interface on Internet Explorer for the DVR, but you get the error "Login Failed" every time you try to login, it is possible the IP Access setting is configured...
View ArticleThere is a Red "H" on the Screen
If you see a red "H" icon on the DVR screen, then there is an issue with the Hard Drive (HDD). That red H is like the "Check Engine" light for the HDD, that something somehow is wrong with the HDD. Any...
View Article